LABORATORY ACTIVITIES

Chemical Laboratory

All kinds of raw materials being used at our plant goes through chemical and physical compatibility tests. As a result of the analysis, nonconformities in the raw material are detected before starting production and necessary preventive actions are taken. We make sure that only top quality of raw materials are used during our production with incoming quality measurements.

Device List:

ARL PERFORM’X 025 XRF SPECTROMETERS

HERZOG HTP 40 PALET PRESS MACHINE

HERZOG HSM 100 GRINDER MACHINE

PROLAB 1300 °C FURNACE

NUVE EN 500 FURNACE

VULCAN 2MA FUSION MACHINE

Chemical Analysis Laboratory

OES Spectrometers are used to adjust and verify the chemical analysis during production of steel billets. Chemical analyses are perfectly adjusted with the latest model Spectrometers. We make sure that the quality of the production is controlled at every stage with Certificated Raw Material samples.

Device List:

ARL 8860 i-SPARK OPTICAL EMISSION SPECTROMETERS

ARL 4460 OPTICAL EMISSION SPECTROMETERS

Mechanical Testing Laboratory

The mechanical properties of the rebar are tested with the Tensile Test machines, and the ribs measures and physical properties are tested with the Rib Measurement Device.

Device List:

ZWİCK ROELL 1200kN TENSILE TEST MACHINE

ALŞA 600kN TENSILE TEST MACHINE

OSCAM BEND-REBEND DEVICE

ECM DATENSYSTEM RIB MEASUREMET SYSTEMS

WALTERT BAIAG MARKING MACHINE

Metallography Laboratory

Microscopic elements such as non-metallic inclusions, phases, and physical defects in the steel are constantly monitored and kept under control. The data obtained are used in process improvements and continuous development is aimed at our steel quality.

The structural defects of the products are examined by making macro and micro etching on the cross sections taken from the products.

Device List:

STRUERS LaboPoL 21 SAMPLE PREPARATION AND POLISHING DEVICE

STRUERS RatoPoL 22 POLISHING DEVICE

NİKON LV-150 OPTICAL MICROSCOPE